Forums

Topic: Speedo needed  (Read 3133 times)

Offline Ret.Bugtech

Speedo needed

« on: August 25, 2007, 12:17:05 AM »
All right children,  The Godfather is in need of a speedo for the Allison buggy .  68-70 will do nicely .  All the little black odometer gears are history. Someone beat me to them.  Needs to have a working odometer (no stripped little white gear please) and fuel gauge.
     Send me a P.M. or call me -----894-3374
   Thanks

Offline Bugnut

  • padded cell.
  • Joined: Aug 2005
  • Posts: 2953

Speedo needed

« Reply #1 on: August 25, 2007, 12:56:31 PM »
I probably have one let me dig it out. On a side note you got any valves for an 041 heads? If so whatta want for em. I'll go look for a speedo for ya.

Offline Ret.Bugtech

Speedo needed

« Reply #2 on: August 25, 2007, 02:52:08 PM »
When you say 041, are you talking about big valve heads ?   If so I think I have a set of intakes valves for the big valve heads . These came from CB years ago. I think I can put my paws on these somewhere in the Godfather dungeon.

Offline Bugnut

  • padded cell.
  • Joined: Aug 2005
  • Posts: 2953

Speedo needed

« Reply #3 on: August 25, 2007, 11:52:49 PM »
Yep big valve heads,I think the exhaust valves are standard?? Anyways I got some speedo's out in the garage and some at my step dads down the road pretty sure I have a few 68 and up ones and no use for em . I'll dig em out and check to be sure but I'm almost positive.

Offline Ret.Bugtech

Speedo needed

« Reply #4 on: August 26, 2007, 11:50:11 AM »
Scott, This must be your lucky day !   I found all four 39mm intake valves .  All are new, never used.  You are correct on the exhaust valves. You use stock 311-109-612 (1600cc).  Even a blind pig will root up a acorn once in a while.   NOW THEN, Just how bad do you want them ? :lol:  :lol:  :lol:
     Lets see, Hmmmm,  A fully working speedo with fuel gauge and bulb sockets for same, Splined wiper shafts (right & left) , How about wiper arms(10mm nut version) like on a 70 bug ? :whistle:
     The world awaits with bated breath :sleepy1:

Offline Bugnut

  • padded cell.
  • Joined: Aug 2005
  • Posts: 2953

Speedo needed

« Reply #5 on: August 26, 2007, 12:53:23 PM »
ok speedo I have , wiper stuff is a maybe. I have a bucket full but you'll have to look at em to figure em out. Arms I dunno maybe.How bout a zenith 30 vig carb for that split or oval you dont have? :lol: If your available one mornin next week I can bring you your junk after I drop the kid off at school.

Offline Ret.Bugtech

Speedo needed

« Reply #6 on: August 26, 2007, 02:52:32 PM »
Hey ! Any morning will be great. Come tomorow if you want to. The sooner the better . Bring the bucket of wiper stuff.  If you have more than one speedo, bring a few so I can check the "infamous" odometer gear for cracks.

Offline Bugnut

  • padded cell.
  • Joined: Aug 2005
  • Posts: 2953

Speedo needed

« Reply #7 on: August 27, 2007, 07:53:02 AM »
well ok let me get em al rounded up most my 68 and up stuff is at my step dads up the road.

Offline Bugnut

  • padded cell.
  • Joined: Aug 2005
  • Posts: 2953

Speedo needed

« Reply #8 on: August 29, 2007, 07:52:08 PM »
He says theres a couple over there. I gotta work the rest of the week but should be able to grab a minute this weekend.

There was an error while liking
Liking...

About Us

Chattanooga's oldest and largest club for air-cooled and water-cooled Volkswagens, since 1998. Join Us

Follow Us

© 1998-2025 Scenic City Volks Folks