Parts We HaveCase- Good case- 020 mains, STD thrustCrank- New STD/STD crank from Joe at TristatePushrods and tubes- Have pushrods-Zen to get tubesRods - Have 4 good rodsHeads- Have 2 good DPCam Have a good camDowel pins came with caseIntake Have intakeRockers Have good rockersValve covers Have coversDistributor (and drive) we have a 009 with good springs and driveCarb 30/31 that looks good- Need adapterFan and backing plate Might have a good oneGenerator stand We have a standOil plate We have a plateGasket kit Donated by Tri State ImportsGland nut Have a usable gland nutHardware kit Have plenty of hardwarepoints, condenser Have new 009 Points and condenser Lifters Have good liftersGears (timing, crank and cam) Have gearsFlywheel Have a usable flywheelGenerator Have a questionable generatorCrank pulley Have the crank pulleyOil pump Have an oil pump Oil Cooler Cleaned up a used oneMain bearings- new from Mainly ForeignRod Bearings- new from Mainly ForeignCam bearings- New from Mainly ForeignDoghouse Fan Shroud Rick SwaffordCoil New from American ForeignFuel Pump New from American ForeignParts We NeedExhaust valves None yet ($6 each-$24)87mm Rings None yet ($20)Oil screen None yet ($5)Oil pressure switch None yet ($4)plugs, wires None Yet ( $10 and $19)Tins only missing the small parts I think!Generator pulley None yet ($7)Coil bracket none bracket ($2.50)End play shims 3 @ $1.50 each- (have some) (~$96)
Parts We NeedExhaust valves None yet ($6 each-$24)87mm Rings None yet ($20)Oil screen None yet ($5)Oil pressure switch None yet ($4)plugs, wires None Yet ( $10 and $19)Tins only missing the small parts I think!Generator pulley None yet ($7)Coil bracket none bracket ($2.50)End play shims 3 @ $1.50 each- (have some) (~$96)