Anyone need anything from West Coast Metric?

Zen · « **Reply #15 on:** January 12, 2013, 01:32:14 AM »

That's fine. On the left side, the bulb holder is toast. I haven't had a lot of trouble with the right side other than having to clean the contacts from time to time (cracked lense/bad seals = corrosion) so 1 should be sufficiant to get me back on the road. And somewhere I've got a decent used lense I bought at the Knoxville show in 2010.

If I can catch a break in the rain, I was going to try to drain the tank and clean out the carb this weekend. I'm tired of paying for auto insurance on a storage building! . . . But then, when I put Homer back on the road, I'll have to buy a storage building AND pay auto insurance . . . oh well, it's time. He's sat too long. He's ready to get out of the yard and see the world again.

volksnick · « **Reply #16 on:** July 23, 2013, 10:38:21 PM »

Tony (takeflight) turned me on to this little parts supply house out in CA at the May meeting. I sent off and received a catalog in the mail last month. I am putting together an order for some stuff Matthew and I need and thought I'd throw it out there to yall as well. Take a look at the catalog and let me know if there is anything you need.

THIS STUFF IS CHEAP!!!

Check out www.vwrepublic.com/Images/century/Century.2013.03.pdf to see about downloading a PDF from earlier this year. Its not the exact same as the june one that I received, but it looks very similar.

Let me know by Friday- I plan on ordering Friday afternoon.

Russ · « **Reply #17 on:** July 23, 2013, 10:44:21 PM »

Them are some good prices! I might have to pick up a few things. I'll let you know by the end of the week after I've gone through the catalog.

volksnick · « **Reply #18 on:** July 23, 2013, 11:30:28 PM »

Quote from: Russ on July 23, 2013, 10:44:21 PM

Them are some good prices! I might have to pick up a few things. I'll let you know by the end of the week after I've gone through the catalog.

Please let me know by Thursday evening or friday midday

Ret.Bugtech · « **Reply #19 on:** July 24, 2013, 11:46:31 AM »

Quote from: Bignick on July 23, 2013, 11:30:28 PM

Quote from: Russ on July 23, 2013, 10:44:21 PM
Them are some good prices! I might have to pick up a few things. I'll let you know by the end of the week after I've gone through the catalog.

Please let me know by Thursday evening or friday midday

I use to deal with these folks A LOT years ago. Whats really sad was they use to have a big store in B'ham Ala. Long gone now.(15-20 years ago) They had a lot of very good quality parts. Example- Kobenscmit or Mahle P/C's $38.00 in lots of 5, Rod bearings $4.50, cam bearings $2.25, Main Brg's $9.50. (From a old catalog I have) Disgusting !!

Zen · « **Reply #20 on:** July 24, 2013, 12:25:51 PM »

Quote from: Ret.Bugtech on July 24, 2013, 11:46:31 AM

Quote from: Bignick on July 23, 2013, 11:30:28 PM
Quote from: Russ on July 23, 2013, 10:44:21 PM
Them are some good prices! I might have to pick up a few things. I'll let you know by the end of the week after I've gone through the catalog.

Please let me know by Thursday evening or friday midday
I use to deal with these folks A LOT years ago. Whats really sad was they use to have a big store in B'ham Ala. Long gone now.(15-20 years ago) They had a lot of very good quality parts. Example- Kobenscmit or Mahle P/C's $38.00 in lots of 5, Rod bearings $4.50, cam bearings $2.25, Main Brg's $9.50. (From a old catalog I have) Disgusting !!

I wonder if Jai still has his Delorian? Does anybody have an extra flux capacitor laying around?

Russ · « **Reply #21 on:** July 25, 2013, 10:20:42 AM »

I'm gonna pass on ordering this week, there's nothing I really have to have "right now".

Ret.Bugtech · « **Reply #22 on:** July 25, 2013, 11:27:10 AM »

Quote from: Zen on July 24, 2013, 12:25:51 PM

Quote from: Ret.Bugtech on July 24, 2013, 11:46:31 AM
Quote from: Bignick on July 23, 2013, 11:30:28 PM
Quote from: Russ on July 23, 2013, 10:44:21 PM
Them are some good prices! I might have to pick up a few things. I'll let you know by the end of the week after I've gone through the catalog.

Please let me know by Thursday evening or friday midday
I use to deal with these folks A LOT years ago. Whats really sad was they use to have a big store in B'ham Ala. Long gone now.(15-20 years ago) They had a lot of very good quality parts. Example- Kobenscmit or Mahle P/C's $38.00 in lots of 5, Rod bearings $4.50, cam bearings $2.25, Main Brg's $9.50. (From a old catalog I have) Disgusting !!
I wonder if Jai still has his Delorian? Does anybody have an extra flux capacitor laying around?

Zen, You must have stayed at a Holiday Express last night

volksnick · « **Reply #23 on:** July 26, 2013, 11:31:31 PM »

Order placed. Should be finalized and sent out on Monday. I'm excited; we got a lot!!!

ASBug · « **Reply #24 on:** July 30, 2013, 11:18:19 AM »

Just saw this, WOW.
What was shipping like?
Any way, when I get rolling on the Ghia, there are a few things I'll need.
Thanks for sharing,
KC

volksnick · « **Reply #25 on:** July 30, 2013, 12:29:20 PM »

Quote from: ASBug on July 30, 2013, 11:18:19 AM

Just saw this, WOW.
What was shipping like?
Any way, when I get rolling on the Ghia, there are a few things I'll need.
Thanks for sharing,
KC

We ordered a few tie rods and drag links, along with a handful of other small, but not exactly light parts. He estimated $30 but was supposed to get back with me to confirm the shipping price. I'm going to give him a call this afternoon and check on the status

volksnick · « **Reply #26 on:** August 03, 2013, 09:50:25 AM »

I got an update from the guy on Thursday. He said he would need my address before he could ship. I told him in was in the email I sent him last week... I guess that is why he doesn't have a website... anyways, we got it cleared up and it went out on Friday. Should be here next Thursday. Its a little slower than I would have expected, but still not awful (faster than CIP!)

volksnick · « **Reply #27 on:** December 01, 2013, 10:14:18 PM »

I am going to make a cyber monday order and I'm already into free shipping on this one. If anyone needs anything that qualifies for free shipping and wants to throw it in, I will gladly order. Deadline is Monday at 6pm.

respond on here.

Zen · « **Reply #28 on:** December 02, 2013, 09:24:52 AM »

Quote from: Zen on December 27, 2012, 01:58:11 AM

Nick, if you are still placing an order with CIP1 . . .

I need two of these: http://www2.cip1.com/ProductDetails.asp?ProductCode=VWC%2D211%2D945%2D241%2DRK

and one of these: http://www2.cip1.com/ProductDetails.asp?ProductCode=C16%2D137%2D191%2DLR

And I'm back in that same boat. I need two taillights for Homer and the seals. I had the one you ordered before and the seals, but I stepped on the lense and broke it the other day . . . and I have no idea what I did with the seals.

volksnick · « **Reply #29 on:** December 02, 2013, 10:05:07 AM »

haha ok...

Is this to get homer running?

Forums

Topic: Anyone need anything from West Coast Metric? (Read 8062 times)

Zen

Re: Anyone need anything from West Coast Metric?

volksnick

Re: Anyone need anything from Century Distributors?

Russ

Re: Anyone need anything from West Coast Metric?

volksnick

Re: Anyone need anything from West Coast Metric?

Ret.Bugtech

Re: Anyone need anything from West Coast Metric?

Zen

Re: Anyone need anything from West Coast Metric?

Russ

Re: Anyone need anything from West Coast Metric?

Ret.Bugtech

Re: Anyone need anything from West Coast Metric?

volksnick

Re: Anyone need anything from West Coast Metric?

ASBug

Re: Anyone need anything from West Coast Metric?

volksnick

Re: Anyone need anything from West Coast Metric?

volksnick

Re: Anyone need anything from Century Distributing?

volksnick

Re: Anyone need anything from CIP1?

Zen

Re: Anyone need anything from West Coast Metric?

volksnick

Re: Anyone need anything from West Coast Metric?

About Us

Follow Us

Contact Us