Valve Job

Ret.Bugtech · « **on:** January 21, 2007, 01:34:15 PM »

I thought I would jump on here before the Swafford Twins could completely foul everything up. I just went off for "simple open heart surgery and let the Twins almost run amuck into the masses, but I have returned in the nick of time and as time goes by will try to get things back under control.
My little stint worked out well and all valves are now doing what they are supposed to and have quit jumping time. Of course I now have a hard time passing by a Bar-B-Q joint with my new valve seat and Pacemaker installed. My Cardio Dude says I should be burning rubber in about 3 months.
Also many thanks for the thoughts and prayers to everyone. It truly meant a a lot to someone who was just a little more than scared to death.
Thanks for the new title "Wizened Ole Sage" Travis. There's one you don't see nor hear everyday and I will take that as a compliment for sure.
I'm " locked & loaded, Let the games resume" :lol: :lol:

Bugnut · « **Reply #1 on:** January 21, 2007, 02:05:16 PM »

Good to hear you doin ok.Dont hesitate to call if you need anything.

« **Reply #2 on:** January 21, 2007, 04:05:10 PM »

David you go guy! I'm just now getting around to seeing what all is going on with people. I'm glad that worked out for you.Is that all that you have to have done for a while? I hope so.They went up into my heart to see if I needed one but I lucked out.Never the less I got that bill and then thought I was having one for sure lol.

Zen · « **Reply #3 on:** January 22, 2007, 11:34:07 PM »

Glad to have back on the forums! I tried to keep the Swaffords under control while you were out of commission . . . I grabbed the Dasher and brought it to the triangle before they set it up as "lawn art" in your front yard. Not that I didn't think it would make a great piece of lawn art . . . I just didn't want you to come home with your new valve job and a find a new supply of Dasher parts to throw at me! :lol: But seriously, it's great to hear you're doing good. We've missed you!

Bugnut · « **Reply #4 on:** January 23, 2007, 10:52:43 AM »

Seein how you weren't at the last meeting you have no idea how close you were to being club president.Dont you like gettin volunteered? :lol:
Glad to hear your doin well,let us know when your bored or ready for visitors.I'll drop by to annoy,(cough cough) I mean see ya.

certdubtech · « **Reply #5 on:** January 23, 2007, 08:06:56 PM »

Welcome back, DJ...great to hear from you. As others before me have offered, give me a shout if you need anything.
I am curious, though, did you get the standard valve job or did you opt for the 041/044 route? Bet the flycutting would have gotten kinda messy.
Hee hee hee....
Welcome back

Bugnut · « **Reply #6 on:** January 23, 2007, 09:38:09 PM »

Go to sleep Godfather.It's past your bedtime.Besides me and Rick are giving you a grieving period on the acccount that your not all original anymore.So you dont have to creep around late and worry about us. :lol:

Bugnut · « **Reply #7 on:** January 23, 2007, 09:41:47 PM »

Watch out The lady president is on to us!!!!

Smelly_Cat · « **Reply #8 on:** January 24, 2007, 09:24:25 PM »

Glad to hear yer mending. SC

copperjewel · « **Reply #9 on:** January 27, 2007, 04:00:40 PM »

Bows before the newly refurbished GODFATHER and kisses the ring.

Sorry for being so late in responding to you Oh Great and Wise One. I am glad all is going to be OK for you. I am not able to get in here as much as I used to. I wish you all the best and a speedy and full recovery.

"Moe"

Anthony · « **Reply #10 on:** January 28, 2007, 03:50:53 PM »

So glad to hear from you and that you're doing well! We've still got a future appointment at the Runoffs!

« **Reply #11 on:** February 13, 2007, 04:18:12 PM »

David I'm glad you are doing ok.I have to have people to cut up with.Really glad you are ok!!!!!!!

eakanator · « **Reply #12 on:** February 14, 2007, 11:32:02 AM »

Must missed something somewhere.. Glad to hear your doing good.. I'll pass the info along to Rebecca..

Ret.Bugtech · « **Reply #13 on:** February 14, 2007, 12:15:14 PM »

Thanks again to everyone. Things are really doing very well and looking forward to getting up to speed again. Now I know what a old Bug feels like when it gets a new valve job. :lol: :lol:

Gobusgo · « **Reply #14 on:** February 14, 2007, 12:23:29 PM »

Quote

Now I know what a old Bug feels like when it gets a new valve job.

...and electronic ignition!

Forums

Topic: Valve Job (Read 8231 times)

Ret.Bugtech

Valve Job

Bugnut

Valve Job

65dunebuggy

Valve Job

Zen

Valve Job

Bugnut

Valve Job

certdubtech

Valve Job

Bugnut

Valve Job

Bugnut

Valve Job

Smelly_Cat

Valve Job

copperjewel

Valve Job

Anthony

Valve Job

65dunebuggy

Valve Job

eakanator

Valve Job

Ret.Bugtech

Valve Job

Gobusgo

Valve Job

About Us

Follow Us

Contact Us